MITERED DOORS  ..catalog page 12

<< Previous Page 6 of 6

Our mitered doors are all available with flat, 1/4" plywood panels - consult or pricing insert for the reduce costs.  Suggested panels noted serve as a guide only, so that you are free to substitute most other raise panel profiles we offer with any mitered door frame.  Minimum and maximum door and drawer front sizes are noted for the door and panel combination shown.  Any mitered door style is available as the frame only for glass, and most styles are available with mullions added.  (Note -- frames are not grooved on the backside to accept rubber retainer)  As the cross-section diagrams show, some styles, such as the MD150 for example, offer a similar, smaller drawer frame to match that of the door.  Generally, small-sized drawer fronts (i.e. under 8" high for example) will automatically be made with the smaller frame, unless specified otherwise.  If a size less than the minimum size noted here is ordered, then 1/4" flat recessed panel may be used to produce this required size. This result is due to the impossibility of constructing and/or inserting a raise panel for that piece.  (MD320 and MD340 drawer fronts only may have their rails reduce to accommodate a smaller size.)

The Added Touch... Embossing

<< Previous Page 6 of 6